SSAB MEGA PA SYSTEM - SSAB
SSAB MEGA PA SYSTEM - SSAB
SSAB MEGA PA SYSTEM - SSAB
SSAB MEGA PA SYSTEM - SSAB
SSAB MEGA PA SYSTEM - SSAB
SSAB

SSAB MEGA PA SYSTEM

Regular price $8,484.70 $0.00

Share this Product

 Carvin  C1240 mixer Specifications:
  • 4 monitor sends, 2 effects sends
  • 3 band channel EQ with mid-sweep parametrics
  • 5V USB power port
  • response: 20-20k Hz ±1 dB
  • THD distortion: .01% 20-20k Hz
  • E I N: -117 dBm
  • S/N Ratio 90 dB
  • Dynamic Range: 104 dB
  • Mic Gain: 52 dB
  • Line Gain: 30 dB
  • Total Gain: 72 dB (balanced)
  • Max Output: +28 dBm
  • Power Req. 90 to 250VAC 50-60Hz, 50VA
  • Dimensions: 14.5" wide X 16.3" deep X 3.75" high

 CARVIN DCM2000L Amplifiers

  • Built-in limiters help protect drivers
  • LED indicators: power, clip, 3 levels, protect, bridge
  • Balanced XLR and 1/4" inputs
  • Twist-lock output connectors
  • 3rd Twist-lock connector for bridging
  • Heavy-duty output binding posts
  • Rear switches: bridging, limiter, channel paralleling, ground lift
  • Recessed knobs offer better protection against damage
  • Each amp is Audio Precision™ tested, which includes a burn-in under full load

 SAMSON CROSSOVER

  • Filter Type Linkwitz-Riley
  • Operating Modes Stereo 2 or 3-way, switchable to mono 4-way
  • Crossover Frequencies Stereo mode: Low/Mid - 35Hz to 800Hz, or 350Hz to 8kHz
  • (x10 setting), Mid/High - 350Hz to 8kHz
  • Mono mode: Low/Mid - 18Hz to 400Hz, Mid/High - 175Hz to 4kHz
  • Gain Range Input level: -12dB to +12dB
  • Band gain: -6dB to +6dB
  • Front Panel Switches High Pass Filter
  • Noise >90dBu to >94dBu unweighted
  • Dimensions 1U rack, 8 1/2" deep
  • Specialties Built in Limiter with adjustable threshold

 JBL JRX225(double 15” Highs)

  • dual 15" two-way PA speaker
  • two 15" low frequency drivers
  • 1" compression driver with polymer diaphragm
  • heavy-duty crossover components
  • rugged MDF cabinet with steel grille and handles
  • recommended amplifier power: 500-1000 watts RMS
  • frequency range: 45- 16,000 Hz
  • max SPL: 133 dB
  • impedance: 4 ohms
  • crossover frequency: 2.2 kHz
  • 1/4" and Speakon® input connectors

 JBL JRX118 SUBS

  • 18 in. compact subwoofer.
  • 350 W (continuous), 1400 W (peak) power capacity.
  • The rugged enclosure is constructed from 19 mm (.75 in) MDF (Medium Density Fiberboard) using advanced adhesives and mechanical fastener technology for durability and improved low-frequency performance. The enclosure is covered in black carpet.
  • A top mounted, cast aluminum 35 mm pole mount receptacle can receive an optional SS3BK pole to facilitate use of the JRX118SP as a base for a midhigh speaker cabinet.
  • Non-resonant, all steel handles are used.
  • Attractive 18-gauge perforated steel grille protects components from damage.
  • 35 mm pole mount receptacle for use with satellite speakers.